2,700 Horsepower Go-Fast Boat at SEMA Show

When thinking of the annual SEMA show - held each fall in Las Vegas - visions of cool cars, cutting edge technology and innovative products come to mind. And of course, there are the lovely models to help direct your attention to the products on display. Or distract? I could never get that straight . . .

 All of this vast gathering comes together to showcase the newest and best in the automotive world. Think SEMA and think cars.

 This year, there was at least one display that was turning heads and it wasn’t on four wheels. In fact, it was on its side! Yes, the car guys and gear heads got to ogle an impressive assembly of technology, all sitting pretty in the hull of a boat. In fact, that very hull was an impressive bit of technology all on its own. And we haven’t even gotten to the combined 2,700 horsepower neatly tucked away in the engine bay.

 So, to understand why a big, 41 foot boat was front and center in the bastion of automotive wonder, we gotta look at the formidable drivelines on this thing. And the best part is that it’s got two of ‘em.

 Oh, did I just hear muted whimpering from some of the car guys out there? Well, fear not, because these same engines are going to be available for your car, but you’ll probably only need one at a time.

  First, let’s have a quick look at that hull. Composed using a 100%, full epoxy infused technology via the use of vacuum bagging, the process allows for the epoxy to be formed over the gel coat without possible air bubbles being entrapped during the build - a potential problem with a traditional hand layup. Carbon and Kevlar are also introduced in the running surfaces, areas that will take the greatest punishment when it’s go time.

A Lot of Horses

 Scuttlebutt at the SEMA show was that this boat could touch 200 MPH. That’s fast in anything, but to do it on water takes a little more ‘Oomph’. Remember that not only are we having to push the weight of the boat and crew, but overcome the friction of the water. Sure, the catamaran hull design helps in that department by reducing the surface area of the boat coming in contact with the water, but we still got to get it moving forward in the first place. The same precept used to get the most speed out of cars holds true with boats. Throw in more horsepower.

 Horsepower is why Mercury Marine chose the 50th SEMA show as the venue to unveil their new power plants. Shy of having even more of the aforementioned models standing around one of their engines, they were able to create quite a stir by partnering with Dave’s Custom Boats and this beautiful boat. Dave’s is no stranger to go-fast boats, having produced state of the art performance boats for two decades.

The twin 1350 HP engines push power through M8 drives, designed to handle the immense torque of the motors. The Mercury Racing QC4v engine designation is derived from the in house designed, quad cam, four-valve, turbocharged setup.

 Also part of the display was an exotic car, sporting the 1650 crate engine, the 9-Litre V-8 sharing the same aspects as its marine incarnation. Unlike the M-41, I’m sure just the one engine will be enough.

A New Approach

 The unveiling of this line of performance engines coincides with the recent announcement by Mercury Marine that they will be building their own gasoline engines for their MerCruiser stern drives and Zeus pod drives. This was a big step for the company, when considering that they had been getting their power plants from GM (+ Ford in earlier years) and merely ‘marinizing’ them. No longer will they be simply applying their own exhaust and cooling systems, painting them black and shipping to the boat manufacturers. Instead, Mercury will acquire bare block cores from out sourced manufacturers (most likely GM) and fitting them out with their own technology.

 This is a bold move for Mercury, who has been around since 1939, a move motivated by the increasingly rapid makeovers in the corresponding automotive engines. Engine technology is evolving at a quicker and quicker pace and car builders are forced by competition to embrace it, leading to engine production cycles being ever shortened. To maintain a longer term grasp over their marine engine designs, Mercury felt they will be better served by providing their own, steady supply to the end users – boaters & repair facilities – as well as their mainstay, that of the boat manufacturers.

Old is New Again

 This foray into the automotive world isn’t a first for Mercury Marine. Its founder, Carl Kiekhaefer, was an influential force in NASCAR, having won 80% of the races he entered from 1955 to 1957, capturing three national championships. His innovations in the sport are still with us today. These include ‘firsts’ such as his crew being the first to wear matching uniforms and practice pit stops. His team was also the first to transport their cars with enclosed haulers, emblazoned with team colours, of course. Amongst his technical innovations were pleated paper air filters and wide base rims, originating in his road racing R&D efforts.

 Move forward to 1990, when Mercury Marine was tapped by General Motors produce the all-aluminum, 350 cubic inch LT-5 engine for the new Corvette ZR-1. GM approached Mercury as they had already developed the expertise in design and manufacturing of their aluminum marine engines. Taking the concept one step further, Mercury Racing took an LT-5, modified it for marine use and put it a Baja 223 sport boat (Baja was a manufacturer owned by Brunswick, the parent company of Mercury Marine).

 The boat was paired with a similarly powered 1990 Corvette and the duo was known as the ‘Wette Vette’ project, touring the country, creating its own stir. So it looks like the show at SEMA was a revisit of a tried and true marketing concept, with the big difference being the incredible advancements in technology for both boat and motor that has happened in the ensuing years.

Package Deal

 As with anything, time and talent leads to better, faster and safer products. When it comes to a prestige boat like the M-41, there is a sense that Dave’s Custom Boats has realized their goal to ‘Build the Best’. By merging state of the art technology with a refined look not commonly seen on go fast boats, the combined talents at Dave’s and Mercury Racing have produced an end product that is sure to turn heads well beyond SEMA.

So, if you think that all this power, technology and killer good looks would be a nice addition to your collection, it can be had as a package – boat, custom trailer and hauler – for 1.25 million USD.  Sure, that might be a bit pricey for most folks, but imagine the delight of hitting the throttles in this refined beast.  Given what an enchanting ride this boat is, it’s appropriate that the venue for this year’s show was on non-other than the aptly named Paradise Road.

:-)

Boat Review - Regal 2300 RX

Bottom Up Innovation

 Perhaps it’s that very diversity that has inspired such innovations as their patented FasTrac hull, which reduces drag via a stepped hull. This allows for air to be introduced under the hull, just behind the step with the result being less resistance while underway. The effect is a more ‘slippery’ underside for better efficiency.

 If you remember back when the notion of stepped hulls was first being developed with the go-fast crowd, you’ll recall that various manufacturers were discovering that these hulls were encountering some of loss of control during high speed cornering.  The engineers at Regal overcame this
potentially dangerous condition by further advancing the hull design to include precisely placed reverse chines running longitudinally along the bottom to maintain stability and keep a bite on the water. They also provided larger lifting strakes at the hull sides for increased lift. The combined benefits of the tuned steps + increased lift resulted in the FasTrac hull. This innovative design translates into a safe ride with greater fuel economy and increased performance over traditional deep-vee hulls. According to company specs, the FasTrac hull design results in 26% faster speeds and an impressive 30% increase in fuel economy. Fast, safe AND economical? Sounds like a win-win-win scenario to me.


Fun, Fun, Fun

OK, enough time under the boat, let’s dry off and take a look at the features of this family sport boat that make it, well - fun!

  Probably the best way I can think of to describe the 2300 RX is that it is a big bow rider with a sports car heart. Available with your choice of either Mercruiser or Volvo stern drive power plants that range from ranging from 270 to 320 horsepower, you can choose the engine company of preference. Access to the engine compartment is made more convenient by having the stern cover tilt forward, making getting at it from the more practical swim platform side.

With dimensions of 24’ in length and an 8’-6” beam, this trailerable boat has seating for up to 12 people and was designed primarily for fun - and water sports are going to be a big part of that play time. Two stereo speakers, a tow eye and storage for wake boards are located on the ‘Power Tower’, which folds down at the flick of a switch. The ability to tuck it down allows for easier transporting when trailering or better fit into your garage.

 A water friendly feature that I like is that the swim platform is low to the water, making it easy and comfortable for swimmers or skiers to reboard without pinching a nerve to climb out of the water (too many times I’ve seen boats that appear to be better suited to circus contortionists than a family and friends chillin’ out on the water). It also extends well over the outdrive, making it safer when jumping into the water here. Regal also positioned the re-boarding ladder off to the port side and offset it. This frees up the platform for sitting or moving around, even if swimmers are repeatedly in and out of the water. For anyone with younger kids, you’ll quickly see the how this simple design feature would lessen those squabbles between siblings that might otherwise have to climb over one another.

 Further study of the back of the 2300 RX reveals a transom mounted stereo remote control and a pair of LED transom brake lights which act as an extra set of brake/turn signals when the boat is being trailered. A great feature when anchored in shallow water is the auxiliary transom switch to trim the outdrive up or down.

The backrests on the sunpad share that duty with the rear cockpit seats. Removing the center cushions provides for a ‘flexi-teak’ protected walk through to the ‘largest in class’ cockpit and the wrap around, arena style passenger seating.  To port is an aft facing seat, situated for the passenger to keep an eye on skiers or wake boarders. This seat flips forward with the aid of gas assisted rams to reveal a cavernous storage compartment, perfect for stowing oversized items like skis, PFD’s, dive gear and whatever else you want to take along for a fun filled day.

 Behind the helm seat is the lift out cooler. There is a mount for the dining table aft, which is storable when not in use.

One thing I’ve appreciated about Regal boats for many years is that their hulls always look straight and true with consistent colours. Eyeballing the sides of some competitor’s boats sometimes reveals a lesser degree of care when laying up the hull, but again, Regal quality comes through on the 2300 RX. The same quality follows through when looking at the upholstery, available in a palette of colors to match with the hull selections.

 At the helm we find a vinyl wrapped dash to help reduce glare, Faria gauges, power steering and a 12-volt receptacle. The Fusion marine stereo is situated just to port of the steering wheel for uninterrupted access by captain and crew.

Moving forward to the bow there are two forward facing sun pads, complete with fold away armrests. As we found with the cockpit seating, these cushions also tilt up aided by gas struts to provide even more storage. Another nice touch is a dedicated anchor locker; something not always found on boats this size. An additional table mount is also located forward.

 Sized for nimble handling and packed with innovation, the 2300 RX ably reflects the values that Paul and Carol Kuck based Regal Boats on many years ago - values that your family can enjoy for years to come.

Photos courtesy of Regal Boats, www.RegalBoats.com